Parabolic Solar Trough

A parabolic trough is a type of solar thermal energy collector. It is constructed as a long parabolic mirror (usually coated silver or polished aluminum) with a Dewar tube running its length at the focal point. Sunlight is reflected by the mirror and concentrated on the Dewar tube. The trough is usually aligned on a north-south axis, and rotated to track the sun as it moves across the sky each day.

Alternatively the trough can be aligned on an east-west axis, this reduces the overall efficiency of the collector, due to cosine loss, but only requires the trough to be aligned with the change in seasons, avoiding the need for tracking motors. This tracking method works correctly at the spring and fall equinoxes with errors in the focusing of the light at other times during the year (the magnitude of this error varies throughout the day, taking a minimum value at solar noon). There is also an error introduced due to the daily motion of the sun across the sky, this error also reaches a minimum at solar noon. Due to these sources of error, seasonally adjusted parabolic troughs are generally designed with a lower solar concentration ratio.

Heat transfer fluid (usually oil) runs through the tube to absorb the concentrated sunlight. The heat transfer fluid is then used to heat steam in a standard turbine generator. The process is economical and, for heating the pipe, thermal efficiency ranges from 60-80%. The overall efficiency from collector to grid, i.e. (Electrical Output Power)/(Total Impinging Solar Power) is about 15%, similar to PV (Photovoltaic Cells) and less than Stirling dish concentrators.

Current commercial plants utilizing parabolic troughs are hybrids; fossil fuels are used during night hours, but the amount of fossil fuel used is limited to a maximum 27% of electricity production, allowing the plant to qualify as a renewable energy source. Because they are hybrids and include cooling stations, condensers, accumulators and other things besides the actual solar collectors, the power generated per square meter of space ranges enormously.

Energy storage

As this renewable source of energy is inconstant by nature, methods for energy storage have been studied, for instance the single-tank (thermocline) storage technology for large-scale solar thermal power plants. The thermocline tank approach uses a mixture of silica sand and quartzite rock to displace a significant portion of the volume in the tank. Then it is filled with the heat transfer fluid, typically a molten nitrate salt.

Existing plants

The largest operational solar power system at present is one of the SEGS plants and is located at Kramer Junction in California, USA, with five fields of 33 MW generation capacity each.

The 64 MW Nevada Solar One also uses this technology. In the new Spanish plant, Andasol 1 solar power station, the 'Eurotrough'-collector is used. This plant went online in November 2008 and has a nominal output of 49.9 MW.

SANDIA RESEARCHER Rich Diver takes a close-up look at a parabolic trough module at the National Solar Thermal Test Facility in Albuquerque where the latest unit resides. He invented a new and simple way to align trough mirrors using theoretical overlay photographic technology.(Photo by Randy Montoya)

Sandia researcher Rich Diver sets up a device he has developed to calibrate trough-type solar dish collectors to maximize the amount of sunlight they capture.(Photo by Randy Montoya)

Children fabricating Adobe bricks to be used in new construction.

A parabolic trough CSP system uses parabolically curved, trough-shaped reflectors to concentrate sunlight on a receiver pipe running along the inside of the curved surface. This energy heats oil flowing through the pipe, and the heat energy is then used to generate electricity in a conventional steam generator. Source: http://www.solarpaces.org

Areas of the world with excellent solar concentrations.